AJA UDC - Manuale (Pagina 10)

10
Video Tab Screen The Video Screen is where you can configure UDC video inputs and outputs. Pull-
down menu settings are described following the screen graphic.
Mini Config, Video Screen
Output: Determines the UDC output video format. (This selection is used only when
the UDC module is in Remote mode as set by DIP switch #1. In Local mode, the video
output format is determined by DIP switches 2-5). These are the format choices:
SD: The output video format will be 525i59.94 (for 23.98, 29.97, or 59.94 fps
video inputs) or 625i50 (for 25 or 50 fps video inputs).
720p: The output video format will be 720p59.94 (for 23.98, 29.97, or 59.94 fps
video inputs), 720p60 (for 24, 30, or 60 fps video inputs), or 720p50 (for 25 or 50
fps video inputs).
1080i: The output video format will be 1080i59.94 (for 23.98, 29.97, or 59.94 fps
video inputs), 1080i60 (for 24, 30, or 60 fps video inputs), or 1080i50 (for 25 or
50 fps video inputs).
1080psf: The output video format will be 1080psf23.98 (for 23.98 fps video
inputs), 1080psf24 (for 24 fps video inputs), 1080psf25 (for 25 or 50 fps video
inputs), 1080psf29.97 (for 29.97 or 59.94 video inputs), or 1080psf30 (for 30 or
60 fps video inputs).
1080p (low): The output video format will be 1080p23.98 (for 23.98 fps video
inputs), 1080p24 (for 24 fps video inputs), 1080p25 (for 25 or 50 fps video
inputs), 1080p29.97 (for 29.97 or 59.94 video inputs), or 1080p30 (for 30 or 60
fps video inputs).
1080p (high): The output video format will be 1080p50 (for 25 or 50 fps video
inputs), 1080p59.94 (for 23.98, 29.97 or 59.94 video inputs), or 1080p60 (for 24,
30 or 60 fps video inputs).
Add 3:2 Pulldown: When the Add 3:2 Pull down box is checked, 23.98 fps and 24 fps
video inputs are converted to 29.97 fps and 30 fps, respectively, by adding 3:2 pull
down before conversion. Note that this selection is only used when the UDC module
is in Remote mode (DIP switch #1). In Local mode, 3:2 pull down addition is
determined by DIP switch #6.