Vertex Standard PS1000 - Manual (Page 40)

Phantom PS1000 Page 40
11.6.6 Setting Up the Call Waiting Function
Allows the Phantom PS1000 to be setup to reply (ABLE) or set the radio so it
transmits a call that advises the calling vessel the person is UNABLE to reply to the
call at this time. This function is similar to an answering machine. When set up in
UNABLE and a individual call is received the Individual call from the other vessel is
logged in the CALL WAITING directory for you to review and call back at a later time.
1. Press and hold down the [CALL(SET)MENU] key
until “ RADIO SETUP ” menu appears.
2. Press the [ ] key to select “ DSC SETUP ” menu,
then press the [CALL(SET)MENU] key.
3. Press the [ ] or [ ] key to select “ INDIVIDUAL ACK ”
menu, then press the [CALL(SET)MENU] key.
4. Press the [ ] or [ ] key to select “ Ab (Able)” or “ Un
(Unable).”
5. Press the [CALL(SET)MENU] key to store the selected set-
ting.
6. To exit this menu and return to radio operation mode press the [16/9] key.
11.7 GROUP CALL
This feature allows the user to contact a group of specific vessels (example
members of a yacht club) using DSC radios with Group call function to auto-
matically switch to a desired channel for voice communications.
11.7.1 Setting up a Group Call
For this function to operate the same Group MMSI must be programmed into
all the DSC VHF radios within the group of vessels that will be using this fea-
ture. The group MMSI is a nine digit (first digit permanently set to “0”) that will
allow other radios to call your vessel along with others to automatically switch to
a working channel for voice communications. This function is very useful for
yacht clubs and vessels traveling together that want to collectively make an-
nouncements on a predetermined channel.
1. Press and hold down the [CALL(SET)MENU] key
until “ RADIO SETUP ” menu appears.
2. Press the [ ] key to select “ DSC SETUP ” menu,
then press the [CALL(SET)MENU] key.
3. Press the [ ] or [ ] key to select “ GROUP DIR ”
menu, then press the [CALL(SET)MENU] key.
4. Press the [ ] or [ ] key to select “ Add .”
5. Press the [CALL(SET)MENU] key to enabling this
item.