Vertex Standard PS1000 - Manual (Page 15)

Page 15 Phantom PS1000
8.8 CHANGING COG TO TRUE OR MAGNETIC
Allows customizing the NAV data showing GPS Course Over Ground (COG).
Factory default is “True,” however, following the steps below the COG can be
changed to “Magnetic.”
1. Press and hold down the [CALL(SET)MENU] key until
“ RADIO SETUP ” menu appears.
2. Press the [CALL(SET)MENU] key, then press the [ ] or
[ ] key to select “ MAGNETIC ” menu.
3. Press the [CALL(SET)MENU] key.
4. Press the [
] or [ ] key to select “ on (Magnetic)” or “ of
(True).”
5. Press the [CALL(SET)MENU] key to store the selected set-
ting.
6. Press the [16/9] key to return to radio operation.
8.9 CHANGING GPS INFORMATION TO
VESSEL POSITION OR COG
Allows customizing the NAV data showing GPS Information. Factory default is
“Your Vessel’s Current Position,” however, following the steps below the GPS
Information can be changed to Cruise Information (COG: Course Over Ground
and SOG: Speed Over Ground).”
1. Press and hold down the [CALL(SET)MENU] key until
“ RADIO SETUP ” menu appears.
2. Press the [CALL(SET)MENU] key, then press the [ ] or
[ ] key to select “ NAV DISPLAY ” menu.
3. Press the [CALL(SET)MENU] key.
4. Press the [
] or [ ] key to select “ Pos (Your Vessel’s Cur-
rent Position)” or “ Cru (Course Over Ground).”
5. Press the [CALL(SET)MENU] key to store the selected set-
ting.
6. Press the [16/9] key to return to radio operation.