Vertex Standard PS1000 - Manual (Page 28)

Phantom PS1000 Page 28
10.12.3 Priority Scanning (P-SCAN)
The Phantom PS1000 is set to Channel 16 as the priority channel.
1. Set the squelch level to the “squelch threshold” (the background noise is
disappeared).
2. Select a desired channel to be scanned using the [ ] or [ ]
key, then press and hold the [SCAN] key. “MEM” will appear
on the LCD which indicates the channel has been pro-
grammed into the transceivers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver’s memory, select the channel
then press and hold the [SCAN] key, “MEM” will disappear in the LCD.
5. To start priority scanning, press the [SCAN] key momantarily
(“ P-SCAN ” appears on the LCD). Scanning will proceed be-
tween the memorized channels and the priority channel. CH
16 the priority channel will be scanned after each pro-
grammed channel.
6. To stop scanning, press the [SCAN], [CALL(SET)MENU], [WX], [16/9], [DIS-
TRESS], or PTT key.
: When DSC Scanning method is enabled. The DSC scan is ON in default.
NOTE
Triple watch (T/W) means the radio is watching CH70 for DSC Calls.
Dual watch (D/W) means the radio is not watching CH70 for DSC Calls.
MEM CH. CH. 16 CH. 70 MEM CH. CH. 16 CH. 70