Pioneer DV-LX50 - Manuale (Pagina 20)

04
20
En
Chapter 4
Getting started
Switching on and setting up
When you switch the player on for the first time the Startup
Navigator screen appears. We recommend using this to make a few
basic player settings.
1 Switch on your TV and set the video input to this player.
2 Press the  STANDBY/ON button on the remote control or
the front panel to switch on.
• When you switch on for the first time, your TV should display the
Startup Navigator screen.
• When you have this unit connected to a plasma television that is
compatible with HDMI Control, language settings are imported
from the plasma television’s OSD settings before Startup
Navigator begins.
3 Use the / buttons to choose a language, then press
ENTER.
4 Press ENTER to start setting up using the Startup Navigator.
If you don’t want to use the Startup Navigator, press  to select
Cancel, then press ENTER to exit the Startup Navigator.
5 Use the / buttons to select the terminal from which the
audio signals are to be output, then press ENTER.
• If you have selected Analog, proceed to step 6.
• If you have selected COAX/OPT, proceed to step 7.
• If you have selected HDMI or I don’t know, proceed to step 8.
6 Use the / buttons to select whether to output the
analog audio signals from the 2ch or 5.1ch audio outputs, then
press ENTER.
7 Use the / buttons to select whether or not to convert
the digital audio signals output from the DIGITAL AUDIO OUT
(COAXIAL/OPTICAL) into linear PCM format (‘Yes’ or ‘No’), then
press ENTER.
• Proceed to step 8.
DVLX50_WY_EN.book 20 ページ ２００７年８月３０日 木曜日 午前１１時１９分