Pioneer DV-LX50 - Manuale (Pagina 19)

03
19
En
Englis
h
Setting up the remote to control your TV
You can use the supplied remote to control your TV. To be able to use
this feature you first have to program the remote with a maker code
from the table below.
1 Press and hold down the CLEAR button, then enter the
maker code for your TV.
See the table below for the list of maker codes. If there is more than
one code given for your make, input the first one in the list.
• If the maker’s name of your TV doesn’t appear in the table below,
you will not be able to use this remote to control your TV.
2 Press  TV to check that the remote works with your TV.
If the remote is set up correctly, the TV should switch on/off. If it
doesn’t and there is another code given for your maker, repeat step
1 with a new code.
Using the TV remote control buttons
The table below shows how to use this remote control with your TV.
Button What it does
 TV Press to switch the TV on/off (standby)
INPUT SELECT Press to change the TV’s video input
VOLUME +/– Use to adjust the TV volume
CHANNEL +/– Use to change TV channels
Maker Code
Aiwa 38
Funai 36
GE 11, 28
General 34
Goldstar 10, 23
Grandiente 30
Hitachi 06, 24, 25, 32
Magnavox 12, 29
Mitsubishi 09
NEC 37
Panasonic 08, 22, 41
Philips 07
Pioneer 00, 35, 40, 44
RCA 01, 15, 16, 17, 18
Samsung 73, 75
Sanyo 14, 21
Sharp 02, 19, 27
Sony 04
Toshiba 05, 26, 31, 43
JVC 13, 33, 42
Zenith 03, 20
DVLX50_WY_EN.book 19 ページ ２００７年８月３０日 木曜日 午前１１時１９分