Pioneer DV-LX50 - Manuale (Pagina 11)

02
11
En
Englis
h
Connecting using a SCART AV cable
A SCART-type AV connector is provided for connection to a TV or AV
receiver. The video output is switchable between ordinary
composite, S-Video and RGB. See
AV Connector Out on page 33
for how to set it.
The SCART AV connector also outputs analog audio, so there is no
need to also connect the
AUDIO OUT (5.1ch) jacks.
• Use a SCART cable (not supplied) to connect the AV
CONNECTOR (RGB) TV/AV Receiver output to a SCART AV input
on your TV (or AV receiver).
Connecting using the S-Video output
If your TV (or other equipment) has an S-Video input, you can use the
S-Video output on this player instead of the standard (composite)
output for a better quality picture.
• Use an S-Video cable (not supplied) to connect the S-VIDEO
OUT to an S-Video input on your TV (or monitor or AV
receiver).
Line up the small triangle above the jack with the same mark on the
plug before plugging in.
Connecting using the component video
output
You can use the component video output instead of the standard
video out jack to connect this player to your TV (or other equipment).
This should give you the best quality picture from the three types of
video output available.
• Use a component video cable (not supplied) to connect the
COMPONENT VIDEO OUT jacks to a component video input on
your TV, monitor or AV receiver.
Watching 1080i/720p/576p/480p from the component
video outputs
This player can output 1080i/720p/576p/480p from the component
video output. Compared to 576i/480i, 1080i/720p/576p/480p
effectively doubles the scanning rate of the picture, resulting in a
very stable, flicker-free image.
To set up the player for use with a progressive scan or HD (High
Definition) TV, see
Resolution (Max) on page 33. When the player
is set to output progressive scan video, the PRGSVE indicator lights
in the front panel display.
Important
• If you connect a TV that is not compatible with a 1080i/720p/
576p/480p and switch the player to them, you will not be able to
see any picture at all. In this case, switch everything off and
reconnect using the supplied video cable (see Easy connections
on page 10), then switch back to
576i/480i (see Switching the
video output to 576i/480i using the front panel controls on
page 12).
TV
To SCART AV input
TV
To S-Video input
TV
To component video input
DVLX50_WY_EN.book 11 ページ ２００７年８月３０日 木曜日 午前１１時１９分