Listening to your system 05, Using virtual surround back (vsb) – Pioneer VSX-817-K Manuale d'uso

Pagina 30

Advertising
background image

Listening to your system

05

30

En

The table below indicates when you will hear
the surround back channel (

=Sound plays

through surround back speaker).

Press SB ch PROCESSING to select a

surround back channel option.
Each press cycles through the following:

SB ON – 6.1 decoding is always used (for
example, a surround back channel will be
generated for 5.1 encoded material)

SB AUTO – Automatically switches to 6.1
decoding for 6.1 encoded sources (for
example, Dolby Digital EX or DTS-ES)

SB OFF – Maximum 5.1 playback

Using Virtual Surround Back (VSB)

When you’re not using surround back speaker,
selecting this mode allows you to hear a virtual
surround back channel through your surround
speakers. You can choose to listen to sources
with no surround back channel information, or
if the material sounds better in the format (for

example, 5.1) for which it was originally
encoded, you can have the receiver only apply
this effect to 6.1 encoded sources like Dolby

Digital EX or DTS-ES.

1

Depending on the input signal and the
Listening Mode, the Virtual Surround Back
mode may not be effective.

VSX-817 model only – The table indicates when
you will hear the virtual surround back channel
(

=Sound plays through surround speaker).

Press SB ch PROCESSING / VSB MODE to

select a virtual surround back channel option.
Each press cycles through the following:

VSB ON – Virtual Surround Back is always
used (for example, on 5.1 encoded
material)

VSB AUTO (VSX-817 model only) – Virtual
Surround Back is automatically applied to
6.1 encoded sources (for example, Dolby
Digital EX or DTS-ES)

VSB OFF – Virtual Surround Back mode is
switched off

Note

1 You can’t use virtual surround back with headphones, the Stereo, Front Stage Surround Advance, Stream Direct mode, or if
the surround speaker is set to

NO in Speaker setting on page 37 (VSX-817 model only – however, the surround back speaker must

be set to

NO).

Type of source

SBch

Processing /

Virtual SB

mode

Standard

Advanced

surround

Multichannel

sources

Stereo sources

2 Pro Logic II x

2 Pro Logic

Neo:6

Dolby Digital EX/DTS-ES/
WMA9 Pro encoded
multichannel sources with
6.1ch surround

ON

a

AUTO

a

Dolby Digital/DTS/WMA9 Pro
encoded multichannel
sources

ON

a

AUTO

a

Dolby Digital/DTS/WMA9 Pro
encoded stereo source; other
digital stereo source

ON

a,b

a

AUTO

c

a

Analog 2-channel (stereo)
sources

ON

b

AUTO

c

a Excluding WMA9 Pro format

b Only applicable when using the Virtual Surround Back mode.
c Not applicable when using the Virtual Surround Back mode.

VSX417_817.fm Page 30 Wednesday, December 20, 2006 2:35 PM

Advertising
Questo manuale è associato alle seguenti prodotti: