Vertex Standard FT-2800M - Manual (Page 52)

50 FT-2800M O
PERATING
M
ANUAL
M
ENU
S
ELECTION
D
ETAILS
00 ALPH
Function: Programming an Alpha/Numeric label for a memory. See page 31 for details.
01 APO
Function: Enables/disables the Automatic Power Off feature.
Available Values: 1H - 12 H, or OFF (1 Hour ~ 12 Hours)
Default: OFF
02 ARS
Function: Activates/deactivates the Automatic Repeater Shift feature.
Available Values: ON/OFF
Default: ON
03 BEEP
Function: Enables/disables the key beeper.
Available Values: ON/OFF
Default: ON
04 BELL
Function: Selects the CTCSS/DCS Bell Ringer repetitions.
Available Values: 1, 3, 5, 8, REPEAT, or OFF
Default: OFF
05 CK SFT
Function: Shifting of the CPU clock frequency.
Available Values: ON/OFF
Default: OFF
This function is only used to move a spurious response “birdie,” should it fall on a desired
frequency.
06 DC IN
Function: Indicates the DC Supply Voltage.
07 DIMR
Function: Setting of the front panel display’s illumination level.
Available Values: 1, 2, 3, or OFF
Default: 2
08 DTMF
Function: Enables/disables the DTMF Autodialer.
Available Values: ON/OFF
Default: OFF
“S
ET
” (M
ENU
) M
ODE