Vertex Standard FT-2800M - Manual (Page 35)

33 FT-2800M O
PERATING
M
ANUAL
M
EMORY
O
PERATION
H
OME
C
HANNEL
M
EMORY
A Convenient one-touch “Home” channel memory is available to simplify return to your
most-often-used frequency. This memory does not appear in the regular memory bank, to
simplify operation and speed recall of this important channel.
To recall the Home channel, just press the [D/
MR(MW)] key, repeatedly if necessary, until the “HM”
icon appears on the display; this indicates that the Home
Channel has been recalled.
The factory default frequency for the Home channel is
146.520 MHz (USA version, EXP version: 144.000
MHz). You can re-program the Home channel in a man-
ner identical to that used for the regular memories:
1. From the VFO mode, tune in the frequency you wish
to store, and set all repeater shifts and other data just the way you do for “normal”
memory channel storage.
2. Press and hold in the [D/MR(MW)] key for one second, then press the [REV(DW)] key
to store the displayed data into the Home channel. The memory label will disappear
(since you are still operating in the VFO mode).
You may also append an alpha-numeric “Tag” (label) to a Home channel, as described pre-
viously. be sure to recall the Home channel first, then enter the Menu (selection “00 ALPH”)
to program the label’s contents.
From the Home channel, you may tune off (as in the Memory Tune mode) with-
out doing anything more than rotating the main DIAL knob. This automatically
shifts control to the VFO, making it a good idea to program in your area’s “Calling
Frequency” as the Home channel. Once contact is established, you may then tune off the
Calling Frequency to an open simplex frequency to carry on your QSO.
M
EMORY
-O
NLY
M
ODE
Once memory channel programming has been completed, you may place the radio in a
“Memory Only” mode, whereby VFO and Home Channel operation are impossible. This
may be particularly useful during public-service events where a number of operators may be
using the radio for first time, and ultimate simplicity of channel selection is desired.
To place the radio into the Memory Only mode, turn it off. Now press and hold in the
[MHz(SET)] and [D/MR(MW)] keys while turning the radio on. The VFO and Home Channel
will now be disabled.
To return to normal operation, repeat the above power-on procedure.
USA version
EXP version