Vertex Standard FT-2800M - Manual (Page 11)

9 FT-2800M O
PERATING
M
ANUAL
I
NSTALLATION
B
ASE
S
TATION
I
NSTALLATION
The FT-2800M is ideal for base station use as well as in mobile installations. The FT-
2800M is specifically designed to integrate into your station easily, using the information to
follow as a reference.
AC Power Supplies
Operation of the FT-2800M from an AC line requires a power source capable of providing
at least 15 Amps continuously at 13.8 Volts DC. The FP-1023 and FP-1030A AC Power
Supplies are available from your Yaesu dealer to satisfy these requirements. Other well-
regulated power supplies may be used, as well, if they meet the above voltage and current
specifications.
Use the DC power cable supplied with your transceiver for making power connections to the
power supply. Connect the RED power cable lead to the POSITIVE (+) power supply
terminal, and connect the BLACK power cable lead to the NEGATIVE (–) power supply
terminal.
Base Station Feet
The supplied Base Station Feet allow the transceiver to
be tilted upward for better viewing.
To install the Base Station Feet, remove the two screws
affixing the front side of the bottom cover , then install
the Base Station Feet using these screws.
PWR MHz REV LOW D/MR