Vertex Standard TRANSCEIVER VX-1700 - Manual (Page 29)

29
CE77 PC Programming Software
"K
EY
F
UNCTION
" P
ARAMETERS
KEY FUNCTION PARAMETERS
This parameter sets the configurations for the key-
pad and button functions of the radio.
Put a check mark into the check box to enable ad-
justment of its parameter from the transceiver’s set
(“menu”) mode.
The available parameters are: P1 SET, P2 SET, P3
SET, P4 SET, and PU/D SET.
P1 SET - P4 SET
This parameter programs the Programmable
Function Button feature.
The available selections are: 1CH, 2CH, 3CH,
4CH, 1 MHz UP, 1 MHz Down, CLAR (+), CLAR
(-), DW, ENCRYPTION, LOCK, PRI, SCAN, SPK
OFF, RF PWR SEL, VOX, ALE, CALL, MONI,
RCV MSG, SELCALL,TELCALL, AUX TOGGLE,
AUX PRS TO H, AUX PRS TO L, and N/A.
PU/D SET
This parameter programs the Programmable
Function Button feature which is located between
the CH and VOL knobs.
The available selections are:
2182-ALARM: Pressing the left button acti-
vates the alarm generator.
Pressing the right button plac-
es the radio in the “Emergen-
cy Channel” mode.
Press both buttons to transmit
the alarm tone.
UP-DWN: Press the buttons to select the
frequency control method
among the “VFO mode,” “ITU
mode,” and “Memory mode.”
Selection Key Function
1CH Recalls the Dealer pre-programmed channel “1” directly while operating in the Memory Channel mode.
2CH Recalls the Dealer pre-programmed channel “2” directly while operating in the Memory Channel mode.
3CH Recalls the Dealer pre-programmed channel “3” directly while operating in the Memory Channel mode.
4CH Recalls the Dealer pre-programmed channel “4” directly while operating in the Memory Channel mode.
1 MHz UP Tunes the VFO frequency upward in 1 MHz steps while operating in the VFO mode.
1 MHz Down Tunes the VFO frequency downward in 1 MHz steps while operating in the VFO mode.
CLAR (+) Tunes the receiver frequency upward without changing the transmit frequency (Clarifier function).
CLAR (–) Tunes the receiver frequency downward without changing the transmit frequency (Clarifier function).
DW Activates the Dual Watch feature.
ENCRYPTION Toggles the Encryption feature “on” and “off.”
LOCK Toggles the Key Lockout feature “on” and “off.”
PRI Activates the Priority Scan.
SCAN Activates Scanning.
SPK OFF Toggles the internal speaker (or external speaker, if used) “on” and “off.”
RF PWR SEL Selects the transmit power output level (“Low,” “Medium,” and “High”).
VOX Toggles the VOX feature “on” and “off.”
ALE Toggles the ALE (Automatic Link Establishment) feature “on” and “off.”
CALL Transmits a Selcall (or ALE) while operating in the Selcall (or ALE) mode.
MONI Disables the noise squelch action (to hear background noise).
Press again this key to activate the noise squelch (quiet the noise).
RCV MSG Recalls the last-received Selcall or ALE Message.
SELCALL Toggles the SELCALL feature “on” and “off.”
TELCALL Transmits a Telcall while operating in the Selcall mode.
AUX TOGGLE Toggles the optional accessory port “3” “on” and “off.”
AUX PRS TO H Turns the optional accessory port “2” to “High.”
AUX PRS TO L Turns the optional accessory port “1” to “Low.”
Accessory Port “3”
Accessory Port “2”
Accessory Port “1”
MAIN Unit