Installing your microwave oven – Samsung FORNO A MICROONDE G2618C Manuale d'uso

Pagina 36

Advertising
background image

8

GB

Place the oven on a flat, level surface strong enough to safely bear

the weight of the oven.

1

When you install your oven, Make sure there is adequate
ventilation for your oven by leaving at least 10 cm
(4 inches) of space behind, on the sides of the oven
and 20 cm (8 inches) of above

.

2

Remove all packing materials inside the oven.
Install the roller ring and turntable.
Check that the turntable rotates freely.

Never block the air vents as the oven may overheat and
automatically switch itself off.
It will remain inoperable until it has cooled sufficiently.

For your personal safety, plug the cable into a 3-pin, 230 Volt,
50Hz, AC earthed socket. If the power cable of this appliance
is damaged, it must be replaced by a special cable
(I-SHENG SP022, KDK KKP4819D, EUROELECTRIC 3410,
SAMIL SP-106B, MOONSUNG EP-48E). Contact your local
dealer to have it replaced. The power cable of ISRAEL is
PENCON(ZD16A), S/AFRICA APEX LEADS SA16 and
NIGERIA, GHANA, KENYA and U.A.E is PENCON(UD13A1).

Do not install the microwave oven in hot or damp
surroundings like next to a traditional oven or radiator.
The power supply specifications of the oven must be
respected and any extension cable used must be of the same
standard as the power cable supplied with the oven.
Wipe the interior and the door seal with a damp cloth before
using your microwave oven for the first time.

Installing Your Microwave Oven

20 cm
above

10 cm

behind

10 cm

on the side

G2618C1(GB) 8/24/00 4:48 PM Page 8

Advertising