Proel PLHT575PF30 - Manuale (Pagina 10)

REPLACING THE LAMP
A lamp must be installed before you use the luminaire.
HPL lamp
Lamp retaining clips
Lamp retention
brackets
Lamp housing
WARNING: Let the lamp cool before replacing
1. Disconnect power to the luminaire before installing the lamp.
2. Rotate the lamp housing counter clockwise.
3. Remove the lamp housing, substitute the lamp locking it with lamp retaining clips.
4. Repeat steps 3 ÷ 1 to reposition the lamp housing.
CAUTION: Use caution when installing or replacing any lamp.
When installing/replacing lamp, be sure to point the lamp away from your face and away from
others before inserting it firmly into the assembly.
This may prevent injuries if the lamp should break.
NO OK
CAUTION: To avoid premature lamp failure, do not touch the lamp glass. If you do, clean it
carefully with isopropyl alcohol and a clean lint-free cloth. Allow to dry before operation.
11