Rockwell Automation 1494C-xxx Cable Operated 400A Disconnect Switch Manuale d'uso
Pagina 2
PN-133648
DIR 42052-159 (Version 03)
Copyright © 2013 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.
Go to Installation Instruction Sheet 42052-155-01.
Trailer Fuse Block Installation
4
Cable Mechanism Installation
3
1
2
Rotate connecting rod (clockwise) into drive bar until it begins to exit the drive bar
(approximately 18 turns)
Verify that disconnect switch and handle are in "ON"
position. (Switch blades will not be visible)
3
Align connecting rod with primary link
4
Install hitch pin clip
5
Turn disconnect handle "OFF" and install
handle mechanism spring
Primary Link
Drive
Bar
ATTENTION: Check for proper operation. Upon successful completion of the
installation instructions no further adjustment of the cable mechanism is required.
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 1494C-IN004C-EN-E - January 2013