Safety instructions, 1 installation, Electrical connection – Electrolux EOR3430DAX Manuale d'uso

Pagina 4: 2 use

Advertising
background image

• Do not use harsh abrasive cleaners or sharp metal

scrapers to clean the glass door since they can scratch
the surface, which may result in shattering of the glass.

• To remove the shelf supports first pull the front of the

shelf support and then the rear end away from the side
walls. Install the shelf supports in the opposite se-
quence.

2.

SAFETY INSTRUCTIONS

2.1 Installation

WARNING!
Only a qualified person must in-
stall this appliance.

• Remove all the packaging.
• Do not install or use a damaged appli-

ance.

• Obey the installation instruction sup-

plied with the appliance.

• Always be careful when you move the

appliance because it is heavy. Always
wear safety gloves.

• Do not pull the appliance by the handle.
• Keep the minimum distance from the

other appliances and units.

• Make sure that the appliance is installed

below and adjacent safe structures.

• The sides of the appliance must stay

adjacent to appliances or to units with
the same height.

Electrical connection

WARNING!
Risk of fire and electrical shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.
• Make sure that the electrical information

on the rating plate agrees with the pow-
er supply. If not, contact an electrician.

• Always use a correctly installed shock-

proof socket.

• Do not use multi-plug adapters and ex-

tension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable.
Contact the Service or an electrician to
change a damaged mains cable.

• Do not let mains cables to come in

touch with the appliance door, specially
when the door is hot.

• The shock protection of live and insula-

ted parts must be fastened in such a
way that it cannot be removed without
tools.

• Connect the mains plug to the mains

socket only at the end of the installa-
tion. Make sure that there is access to
the mains plug after the installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to discon-

nect the appliance. Always pull the
mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.

• The electrical installation must have an

isolation device which lets you discon-
nect the appliance from the mains at all
poles. The isolation device must have a
contact opening width of minimum 3
mm.

2.2 Use

WARNING!
Risk of injury, burns or electric
shock or explosion.

4

www.electrolux.com

Advertising
Questo manuale è associato alle seguenti prodotti: