Pioneer VSX-D714 - Manuale (Pagina 10)

5 minute guide 02
10
En
• If you select subwoofer ( SB SW ) in the Surround back speaker setting on page 43 you can
hook up a subwoofer instead of speakers to the surround back speaker terminals. Connect
the wires just as above (and as shown below), connecting the positive wire to the right
channel (
+ ) terminal, and the negative wire to the left channel ( – ) terminal.
4 Plug in the receiver and switch it on, followed by your DVD player, your subwoofer
and the TV.
Make sure you’ve set the video input on your TV to this receiver. Check the manual that came
with the TV if you don’t know how to do this.
Also make sure that DVD/LD is showing in the receiver’s display, indicating that the DVD input
is selected. If it isn’t, press DVD on the remote control to set the receiver to the DVD input.
5 Press QUICK SETUP on the front panel to specify your speaker setup, room size and
listening position.
Use the MULTI JOG dial to select and ENTER to confirm your selection. See Using the Quick
Setup on page 11 if you’re unsure about the settings.
VSX-D814 only
• For a more complete surround sound setup, we recommend using the automatic MCACC
setup in the Quick surround sound setup on page 13.
6 Play a DVD, and adjust the volume to your liking.
There are several other sound options you can select. See Listening to your system on page 34
for more on this. See also Choosing your receiver setup on page 41 for more setup options.
• Depending on your DVD player or source discs, you may only get digital 2 channel stereo
and analog sound. In this case, the listening mode must be set to STANDARD (it should
already be set—see Listening in surround sound on page 34 if you need to do this) if you
want multichannel surround sound.
R L SURROUND BACK
Surround back
speaker (or
subwoofer)
VSX-D814
VSX_714_814.fm 10 ページ ２００４年１月２８日 水曜日 午前１０時１８分