ORLA Stage Starter - Manuale (Pagina 10)

10
TOUCH SENSITIVITY
Just like an acoustic piano, your instrument has an 88 note keyboard with velocity control. This
means the level of the audio signal will be in proportion with the velocity of the key pressed. If you
play soft you will have a quiet sound, while if you play very hard you will have a much louder
sound .
The TOUCH SENSE button allows you to select 3 different touch sensitivity curves:
1 - HARD
This setting requires the keys to be played quite hard to produce
maximum loudness.
2 - NORMAL This setting produces standard keyboard response. This is the factory default
mode.
3 - SOFT This setting allows maximum volume with light key pressure.
TOUCH ON/OFF. This setting turns off the velocity sensitivity, and all notes play at the same
volume no matter how hard or soft they are played.
To select the desired touch sensitivity settings, follow the instructions:
1.
For the HARD setting, hold the 3 white SELECT keys and press the F#6.
2. For the NORMAL setting, hold the 3 white SELECT keys and press the G#6.
3. For the SOFT setting, hold the 3 white SELECT keys and press the A#6.
4. For the NO TOUCH SENSITIVITY setting, hold the 3 white SELECT keys and press the
D#6. In this mode the Touch Sense Value will be automatically set at 100.
CHORUS
This gives all the sounds of these sections a fuller, rounder and warmer sound.
If the CHORUS effect is selected , it will stay switched ON even if a different sound is selected
while playing. At Power Up the CHORUS effect will always be switched OFF.
1.
For CHORUS ON, hold the 3 white SELECT keys and press the C#5.
2. For CHORUS OFF, hold the 3 white SELECT keys and press the C#5.