Proel WCS1000RX - Manuale (Pagina 8)

8
13. DATA
Data connection for optional device.
14. 12-15VDC 2A
Socket for the AC/DC adaptor: use only the adaptor supplied with the system.
15. BALANCED OUTPUT
Balanced audio output, to be connected to the audio system and used with long cable runs.
16. UNBALANCED OUTPUT
Unbalanced audio output that can be used as an alternate or additional output.
17. ANT B
Socket for first RF antenna for DELEGATE microphone units. Connect here the first B antenna.
18. ANT B
Socket for second RF antenna for DELEGATE microphone units. Connect here the second B antenna.
19. ANT A
Socket for RF antenna for CHAIRMAN microphone unit. Connect here the A antenna.
WCS1000C and WCS1000D TRANSMITTER UNIT
See FIG. 2 at page 37.
1.
MICROPHONE
Microphone capsule with a hyper-cardioid unidirectional pattern.
2. TALK LIGHT
This indicator is on when microphone is active: the display shows “CH-__-SPEAK”. The indicator is off
when the transmitter is off or it’s ready: in this case the display shows “CH-__-READY”.
3.  DOWN button
Use this button to reduce the unit’s microphone level or to edit an option selected using the SET button.
4.  UP button
Use this button to increase the unit’s microphone level or to edit an option selected using the SET button.
5. MUTE / SET button
When the transmitter is active and the display shows “CH-__-SPEAK”, if this button is held down it mutes
the microphone: the display shows “CH-__-MUTE”. When it’s released, the microphone is active again
“CH-__-SPEAK”. Keep this button pressed while the transmitter unit is turned on to set the transmitter
parameters (see set-up instructions).
 TIP, HOW TO MUTE TEMPORARILY THE CONVERSATION: the MUTE button is useful if the
chairman/delegate wants to mute temporarily the conversation without losing his/her priority, so
keeping the priority even if the microphone is muted.
6. TALK button
Press this button to talk: the microphone is active, the TALK light is on and the display shows “CH-__-
SPEAK”.
Press this button again to turn off the microphone: the TALK light is off and the display shows “CH-__-
READY”.
7. PRIORITY button
This button is present only on the WCS1000C chairman transmitter unit: when pressed the chairman
takes its priority over all the delegates units, turning all the other microphones off. The chairman can talk
until he/she presses again the TALK button to turn off his/her microphone (see set-up instructions).