Explore Scientific Large Display Weather Station with Temperature and Humidity - Manuale (Pagina 36)

36
GETTING STARTED
INSERT BATTERIES
1. Remove the battery door from the back.
2. Insert 2x AA (LR6)/1.5V batteries. Please ensure
the polarities (+/-) of the batteries match upon in-
stallation.
3. Reattach the battery door.
NOTE: Replace batteries when [ ] displays, or
when the display is dim.
OUTDOOR SENSOR
The main unit can receive data from up to 3 outdoor
sensors. 1 Sensor is included with delivery.
1. Remove the battery door from the back.
2. Select a channel, then press TX.
3. Insert 2x AAA (LR03)/1.5V batteries. Please ensure
the polarities (+/-) of the batteries match upon in-
stallation.
4. Reattach the battery door.
5. Place the sensor within 30 m (98 ft) of the main unit
using the table stand or wall mount.
TO SEARCH FOR A SENSOR:
The main unit will automatically search for a new sen-
sor after the batteries are installed. To manually initi-
ate a outdoor sensor search, press and hold [ ].
NOTE: The transmission range may vary depending
on many factors. You may need to experiment with
various locations to get the best results.
CLOCK
CLOCK RECEPTION
1. When you insert or replace the batteries, RCC recep -
tion is initiated. To manually start RCC reception
press the [ ] button.
2. The receiving process duration is 7 minutes.
3. During receiving process, the RCC signal symbol
shows:
[ ]
.
4. If the RCC receiving process is successful, a com-
pleted RCC symbol [ ] will be shown in the display
and the date and time will be set automatically. If it
fails within 7 minutes, RCC setting will quit automati-
cally. If that happens, press and hold the [ ] but-
ton to re-initiate RCC receiving.