Proel ZONE8SLAVE - Manuale (Pagina 14)

13
•
Disconnect the plug from the wall outlet if the unit is not to be used for long periods of time.
•
To avoid damage to the power cord, make sure it is not pulled, twisted or bent.
•
Protect the power cord from being walked on or pinched by heavy items placed upon it.
Unit relocation:
Before relocation the product, always unplug it from the wall outlet. The power cord must be unplugged by the wall outlet, and all the
connections wires should be disconnected as well.
Do not open the unit:
Don’t attempt to open or to repair this unit by yourself. For any problem solution not described in this owner’s manual, please refer to qualified
personnel only or consult us or your National Distributor. Improper operation could result in fire or electric shock.
Damage Requiring Service:
• Do not attempt any service to the unit beyond that described in this user manual.
•
In the following cases please refer to an authorised service centre or qualified service personnel:
- The unit isn’t working properly or isn’t working at all.
- The power cord or the plug are damaged.
- Objects have fallen or liquid has been spilled into the unit.
- The unit has been exposed to rain.
- The unit does not appear to operate normally or shows a marked change in performance.
- The unit has been dropped or the housing is damaged.
Servicing:
The user should not attempt to service the unit beyond what is described in the operating instructions. Any other servicing should be referred to
qualified service personnel.
IMPORTANT SAFETY INSTRUCTIONS:
• Follow instructions carefully to ensure proper installation.
•
Do not install, connect or disconnect power supply when the unit is powered to avoid high risk of electric shock.
• Do not open the unit: there are no user serviceable parts inside.
•
If you detect a strange smell coming from the unit, immediately switch it off and disconnect the power cord from the AC outlet.
•
Do not block the unit ventilation openings.
• Avoid operating the unit in overload condition for long periods of time.
•
Do not force controls (pushbuttons, switches, etc.)
• Firmly tighten the screw terminals in order to obtain good speakers wire contacts.
•
For safety reasons, do not defeat the ground connection on the plug. Ground connection is necessary to ensure the user’s safety.
• Use only connectors and accessories specified by the manufacturer.
•
The unit should be placed in a metal rack (see INSTALLATION) and kept far from:
wet places
direct exposure to heat sources (such as sunlight).
ill-ventilated places
•
Unplug the unit from the wall outlet during lightning storms or when it is left unattended or unused.
• To prevent the risk of fire and electric shock, never sprinkle or spill water or other liquids on the unit. Do not put vases or other
objects containing liquids over the unit. In case of interferences in the source signal, THD value will raise over 10%. Do not place this unit
in a bookcase or other restricted spaces
• PROEL S.P.A. shall not be responsible for damage due to improper installation.
LIMITATIONS OF USE:
The Z8SLAVE Voice/Music control unit is designed to be used only for specific audio purposes:
•
connection of constant-voltage amplifiers and speakers;
•
0dBm (20Hz-20kHz) audio input signals.
WARRANTY AND RETURNED PRODUCTS:
The Z8SLAVE Voice/Music control unit is covered by operating warranty and complies with the specifications stated by the Manufacturer. The
warranty applies for 24 months from the date of purchase. If any defects are found in the materials or workmanship or if the product fails to operate
properly during the applicable warranty period, inform your authorized dealer or local distributor, providing purchase receipt or invoice and a
detailed description of the defect/fault. This warranty does not extend to damage resulting from improper use, misuse, neglect or abuse. Proel SpA
will verify damage on returned units. If the unit has been properly used and the warranty is still valid, the unit will be replaced or repaired. Proel SpA
shall not be held liable for any direct or indirect damage caused by the product’s defectiveness.