Pioneer DV-610AV-K - Manuale (Pagina 39)

08
39
En
English
Video Output settings
Setting Option What it means
TV Screen
(This setting effective
for analog and HDMI
video output. See also
Screen sizes and disc
formats on page 51.) 4:3 (Letter Box) Set if you have a conventional 4:3 TV. Widescreen
movies are shown with black bars top and bottom.
4:3 (Pan & Scan) Set if you have a conventional 4:3 TV. Widescreen
movies are shown with the sides cropped so that
the image fills the screen.
16:9 (Wide) Set if you have a widescreen TV.
16:9 (Compressed) Can be selected when you are connected via
HDMI, and have the
HDMI Resolution set to
1920x1080p, 1920x1080i or 1280x720p. Video in
4:3 can be properly displayed on a 16:9 high
definition television (with black bars shown on
either side of the screen).
Component Out Progressive Set if your TV is compatible with progressive scan
video (see your TV’s instruction manual for details).
The
PRGSVE indicator lights in the front panel
display. See also Switching the video output to
interlace using the front panel controls on page 12.
Note that progressive scan video is only output from
the component video jacks.
Interlace Set if your TV is not compatible with progressive
scan video.
AV Connector Out Video Ordinary (composite) video output, compatible
with all TVs.
RGB If your TV is compatible, this setting gives the best
picture quality.
Note that there is no output from the
component jacks when this setting selected.
HDMI Resolution 1920x1080p Set if your TV supports 1920x1080 pixel
progressive-scan video (24 Hz frame rate is not
supported).
1920x1080i Set if your TV supports 1920x1080 pixel interlace
video.
1280x720p Set if your TV supports 1280x720 pixel
progressive-scan video.
720x480p (NTSC)/
720x576p (PAL) Set if your TV supports 720x480 pixel (NTSC)/
720x576 pixel (PAL) progressive-scan video.
720x480i (NTSC)/
720x576i (PAL) Set if your TV supports 720x480 pixel (NTSC)/
720x576 pixel (PAL) interlace video.
DV610AV_WY_EN.book 39 ページ ２００８年５月２２日 木曜日 午後１時５９分