APC AP9475 - Manuale (Pagina 11)

7 InfraStruXure Central Installation Manual
6. Press up on the slide release latch at the side of each slide to slide the system completely into the
rack.
7. Push in and turn the captive thumbscrews on each side of the front chassis panel to secure the
system to the rack.
Replace the rack doors
See the procedures for replacing doors in the documentation provided with your rack.
Caution: Because of the size and weight of the rack cabinet doors, never attempt to remove
or install them by yourself.
Communication Connection
Network overview
The InfraStruXure Central server provides for the management of networked APC devices, NetBotz
appliances, and other third-party SNMP devices. It connects to both your existing network (Public LAN)
and a private network (Private LAN) to manage connected devices.
Set up the Private LAN
Connect a CAT-5 network cable to the network port on each SNMP device
The InfraStruXure Central server can manage any APC device with a network port, as well as third-party
SNMP devices.
Note: If you are running PowerChute® Network Shutdown software with an InfraStruXure
system’s UPS, that UPS must be connected to the public network.
To remove the system from the slide assemblies, press down on the thumbpads of the system
locking mechanism, and then pull the system forward.