Electrolux EOB2200DAX - Manuale (Pagina 15)

1
2
7. Carefully lift (step 1) and remove (step
2) the glass panel.
8. Clean the glass panel with water and
soap. Dry the glass panel carefully.
Installing the door and the glass panel
When the cleaning is completed, install
the glass panel and the oven door. Do the
above steps in the opposite sequence.
The screen-printing zone must face the
inner side of the door. Make sure that af-
ter the installation the surface of the glass
panel frame on the screen-printing zones
is not rough when you touch it.
Make sure that you install the internal
glass panel in the seats correctly. Refer to
the illustration.
10. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem Possible cause Remedy
The appliance does not
operate. The appliance is not acti-
vated. Activate the appliance.
Refer to the chapter "Dai-
ly Use".
The appliance does not
operate. The Minute Minder + End
of Cooking programmer
is not set. Set the Minute Minder +
End of Cooking program-
mer. Refer to the chapter
"Clock functions".
The appliance does not
operate. The fuse in the fuse box
is released. Do a check of the fuse. If
the fuse is released more
than one time, contact a
qualified electrician.
The oven lamp does not
operate. The oven lamp is defec-
tive. Replace the oven lamp.
ENGLISH 15