RCF VHF Diversity wireless michrophone system RX1000 - Manuale (Pagina 16)

16
ENGLISH
ENGLISH
3. Make sure that no objects or liquids can get into this product, as this may
cause a short circuit.
4. Never attempt to carry out any operations, modifications or repairs that
are not expressly described in this manual.
Contact your authorized service centre or qualified personnel should any
of the following occur:
• the product does not function (or functions in an anomalous way);
• the power supply cable has been damaged;
• objects or liquids have got into the unit;
• the product has been subject to a heavy impact.
5. If this product is not used for a long period, switch it off and disconnect
the power cable.
6. If this product begins emitting any strange odours or smoke, switch it
off immediately and disconnect the power supply cable.
7. Do not connect this product to any equipment or accessories not foreseen.
For suspended installation, only use the dedicated anchoring points and
do not try to hang this product by using elements that are unsuitable or
not specific for this purpose.
Also check the suitability of the support surface to which the product
is anchored (wall, ceiling, structure, etc.), and the components used for
attachment (screw anchors, screws, brackets not supplied by RCF etc.),
which must guarantee the security of the system / installation over
time, also considering, for example, the mechanical vibrations normally
generated by transducers.
To prevent the risk of falling equipment, do not stack multiple units of this
product unless this possibility is specified in the instruction manual.
8. RCF S.p.A. strongly recommends this product is only installed by
professional qualified installers (or specialised firms) who can ensure
correct installation and certify it according to the regulations in
force.
The entire audio system must comply with the current standards and
regulations regarding electrical systems.
9. Supports and trolleys
The equipment should be only used on trolleys or supports, where
necessary, that are recommended by the manufacturer. The equipment /
support / trolley assembly must be moved with extreme caution. Sudden
stops, excessive pushing force and uneven floors may cause the assembly
to overturn.
10. There are numerous mechanical and electrical factors to be considered
when installing a professional audio system (in addition to those which
are strictly acoustic, such as sound pressure, angles of coverage, frequency
response, etc.).