Fulgor Milano FDW 8207 - Manuale (Pagina 37)

35
GB
MAINTENANCE
9
9.1 CLEANING OF SPAY-ROTORS
The spray-rotors can easily be removed for the periodic cleaning of the jets in order to prevent possible
obstructions. If necessary, use a pointed tool to remove any residues from the nozzles.
16 17
9.2 CLEANING OF FILTERS
After each wash the filter group should be checked in order to remove possible dirt residues. Proceed as
follows:
• Unscrew the external filter 1 by turning it in an anticlockwise direction.
• Take out the central filter 2
• Remove the fine filter 3.
• Remove the external microfilter 4.
All the components must be carefully cleaned in running water. Before starting a new wash cycle, ensure that
all the filters have been put in their proper place to avoid damaging the wash pump.
WARNING! Dirty filters may hamper wash performance and proper dishwasher functioning.
To remove the upper spray-rotor:
Unscrew anticlockwise the support of the spray-
rotor.
To remove the lower spray-rotor:
Pull the spray-rotor upwards and take it out.
CAUTION: Before performing any cleaning or maintenance work on the dishwasher,
disconnect it from the power supply and shut off the water supply tap.
18
1
19
2
20
3
21