Campomatic C46VM - Manuale (Pagina 26)

UNWRAPPING
Caution! Handling of the machine should always be carried out by two people, using the special
stainless steel handles inserted in the packaging. They are hookable onto the two sides of the
external container and should be inserted into the two upper holes, as shown in the figure.
Caution! The handles should be inserted completely so that the two ends come out of the two
lower holes, as shown in the picture on the right. Otherwise, there is the risk of scratching the
plastic basin inside the container.
Open the cardboard packaging, extract the two blocking brackets for the machine (on the right and
left) and the bag containing:
 No. 4 self-tapping 4.2x13 screws for fixing the front of the machine to the blocking brackets
 No. 16 wood 4.5x16 screws for fixing the blocking brackets to the unit panels.
 No. 1 Plexiglas template for correctly marking the unit bracket holes.
Then remove the polystyrene blocks from the top, and using the protective gloves and lifting the
device with the help of the two handles, fix them in their holes with sticky tape.
26