Campomatic C46VM Manuale d'uso
Pagina 14
WORKING
Switching on (opening the drawer in the work position):
Switch the machine on using the switch located on the right of the main body of the
machine.
An acoustic signal is emitted (short Beep) which indicates the state of "Initial start-up".
The "Initial start-up" state is signalled by all four of the lights (led) switching on at the same time on
the command panel.
Caution! Before touching the buttons, a "self-calibration" period of around 2 seconds must be
completed.
Preserving Cycle
Once the package inside the vacuum-chamber has been prepared as described in the
"preparation" chapter, close the lid by pressing lightly on its front and selecting the
button at
the same time. The preserving cycle is started-up.
When the cycle starts, an acoustic signal is emitted (short Beep).
14