Important, Caution, Maintenance and storage – EarthQuake E43 Manuale d'uso

Pagina 9

Advertising
background image

ASSEMBLY INSTRUCTIONS ANd PARTS ExPLOSIONS

E43 Model

Page 

GetEarthquake.com

800-345-6007

MAINTENANCE ANd STORAGE

AUGER MAINTENANCE

1. The gear case has 4 oz. of grease installed at the factory. It is

recommended that once a year the gear case be split and the
grease level checked. Add grease only if level of grease is below
top of the gears.

dO NOT OvERFILL.

2. Keep all screws, nuts, and bolts tight.
3. For cold weather operation, store the unit in a cool environment.

Transferring the unit from a warm to a cold place can cause the
build up of harmful condensation.

4. If blade performance decreases, turn unit off and disconnect

spark plug wire. Carefully inspect cutting edge of blade for any
signs of wear. If blades show any of these signs, they need to be
sharpened or replaced.

ENGINE MAINTENANCE

COOLING FINS
Cooling fins, air inlets and linkages must be free from any debris
before each use.
AIR FILTER
Never run engine without air cleaner properly installed. Added wear
and engine failure may occur if air cleaner is not installed on engine.
Service air cleaner every 3 months or after 20 hours of operation.
Clean filter daily in extremely dusty conditions.

STEPS FOR CLEANING RING STYLE FOAM FILTER - SEE
PARTS ExPLOSION ON PAGE 16.
1. Wash in warm water with mild soap until dirt and debris are

removed. Press filter when washing, do not twist.

2. Rinse in warm water until soap and dirt are removed.
3. Dry filter by wrapping in a clean cloth and pressing filter until it is

dry.

4. Apply oil to the entire filter.
5. Remove excess oil.
6. Attach the filter and air cleaner cover to the engine.

IMPORTANT

NEvER TWIST AIR FILTERS WhEN CLEANING. ALWAYS PRESS.

CAUTION

TO PREvENT ACCIdENTAL STARTING:
ENGINE MUST BE TURNEd OFF ANd COOL, ANd
SPARk PLUG WIRE MUST BE REMOvEd FROM SPARk
PLUG BEFORE ChECkING ANd AdjUSTING ENGINE
OR EqUIPMENT.
TEMPERATURE OF MUFFLER ANd NEARBY AREAS
MAY ExCEEd 150º F. (65º C). AvOId ThESE AREAS.
ChECk AUGER OFTEN FOR LOOSE NUTS ANd BOLTS.
kEEP ThESE ITEMS TIGhTENEd.
NEvER STORE ENGINE WITh FUEL IN ThE TANk INSIdE
A BUILdING. POTENTIAL SPARkS MAY BE PRESENT
FOR IGNITION OF FUEL ANd FUEL vAPORS.
AN AdULT MUST ALWAYS dO MAINTENANCE ANd RE-
PAIR ON ENGINE ANd AUGER.
ENGINE MUST BE ShUT-OFF, COOL, ANd SPARk PLUG
WIRE REMOvEd BEFORE ANY REPAIR OR MAINTE-
NANCE CAN BE dONE.

Advertising