Fast & Fluid LEOLUX - Manuale (Pagina 15)

FAST & FLUID MANAGEMENT srl
A Unit of Idex Corporation
ENGLISH
GENERAL INFORMATION
This Manual explains how to install the FAST automatic colour dispenser and gives all the information
to ensure easy use and good maintenance.
It is very important to read this manual completely and carefully before you do any
operation on the dispenser in order to start operating with the dispenser in perfect
condition for use.
The dispenser provides the sequential dosing of the colouring pastes for the production of paints in
the requested colour.
In order to assure a good operation of the device, the few required maintenance operations must be
carried out in the recommended times and only by authorised technicians.
Dispenser good working is guaranteed if it is installed in a place with the following criteria:
• ambient air temperature: 10÷40°C
• elative humidity: 30÷90%
It is absolu ely necessary that the electric power where the dispenser is t
connected has an efficient grounding.
To guarantee the best accuracy in dosing, after machine installation
and filling operations, 3 series of full stroke dosage should be
performed. The collected colorant can be poured again into its canister.
If anything in this criteria is not respected it will make the dispenser warranty lost.
For the technical assistance, call the Technical Service of the dispenser’s seller.
Copyright 2001 – FAST & FLUID MANAGEMENT S.r.l. – Milano – Italy
All rights reserved
1155306D-it,en - 17/03/06 15