Pioneer VSX-915-K - Manuale (Pagina 56)

Controlling the rest of your system 10
56
En
Chapter 10:
Controlling the rest of your
system
Setting the remote to control
other components
Most components can be assigned to one of
the
MULTI CONTROL buttons using the
component’s manufacturer preset code stored
in the remote.
However, please note that there are cases
where only certain functions may be
controllable after assigning the proper preset
code, or the codes for the manufacturer in the
remote control will not work for the model that
you are using. 1
If you can’t find a preset code that matches the
component you want to control, you can still
teach the remote individual commands from
another remote control (page 57).
Note
• You can cancel or exit any of the steps by
pressing RECEIVER . To go back a step,
press RETURN .
• After one minute of inactivity, the remote
automatically exits the operation.
Selecting preset codes directly
1 While pressing the RECEIVER button,
press and hold the 1 button.
The remote LCD display shows SETUP .
2 Press the MULTI CONTROL button for the
component you want to control.
The LCD on the remote displays the
component you want to control.
2
3 Use / (cursor left/right) to select
PRESET then press ENTER.
4 Use / (cursor up/down) to select the
first letter of the brand name of your
component then press ENTER.
This should be the manufacturer’s name (for
example,
P for Pioneer).
Note
1 • TV codes (for example, codes for TV, CATV or Satellite TV) can only be assigned to the TV/SAT or TV CONT button.
• If you assign the TUNER function to another component, you will have to reassign it to the Pioneer preset code to use this
receiver’s built-in tuner.
2 You can’t assign the RECEIVER button.
RECEIVER
MULTI CONTROL
SOURCE INPUT
SELECT
DVD/LD TV/SAT DVR/VCR TV CONT
CD CD-R/TAPE TUNER RECEIVER
+10
FL DIMMER SR
DISC
ENTER
TV CONTROL
VOL
TUNE
TUNE
ST ST
INPUT
SELECT TV CH TVVOL
ENTER
D.ACCESS
TOP MENU
CLASS
MENU
BAND
RETURN GUIDE
T.EDIT
SYSTEM
SETUP
VSX_915.book.fm 56 ページ ２００５年２月１日 火曜日 午前１１時６分