Pioneer VSX-915-K - Manuale (Pagina 47)

The System Setup menu 07
47
En
English
Français
Deutsch
Nederlands
Italiano
Español
Manual speaker setup
This receiver allows you to make detailed
settings to optimize the surround sound
performance. You only need to make these
settings once (unless you change the
placement of your current speaker system or
add new speakers.).
These settings are designed to fine-tune your
system, but if you’re satisfied with the settings
made in
Automatically setting up for surround
sound (MCACC) on page 12, it isn’t necessary
to make all of these settings.
1 Select ‘SP SETUP’ from the System Setup
menu then press ENTER .
See Making receiver settings from the System
Setup menu above.
2 Use / (cursor left/right) to select the
setting you want to adjust then press ENTER .
If you are doing this for the first time, you may
want to adjust these settings in order:
• SP SET – Specify the size and number of
speakers you’ve connected (see Speaker
setting below).
• X.OVER – Specify which frequencies will be
sent to the subwoofer (see Crossover
network on page 48).
• CH LEVEL – Adjust the overall balance of
your speaker system (see Channel level on
page 48).
• SP DISTN. – Specify the distance of your
speakers from the listening position (see
Speaker Distance on page 49).
Speaker setting
Use this setting to specify your speaker
configuration (size, number of speakers). It is a
good idea to make sure that the settings made
in
Automatically setting up for surround sound
(MCACC) on page 12 are correct.
1 Select SP SET from the SP SETUP menu.
2 Use / (cursor left/right) to choose the
speaker(s) that you want to set then select a
speaker size.
Use / (cursor up/down) to select the size
(and number) of each of the following
speakers:
• Front ( F ) – Select LARGE if your front
speakers reproduce bass frequencies
effectively, or if you didn’t connect a
subwoofer. Select
SMALL to send the bass
frequencies to the subwoofer. 1
• Center ( C ) – Select LARGE if your center
speaker reproduces bass frequencies
effectively, or select
SMALL to send bass
frequencies to the other speakers or
subwoofer. If you didn’t connect a center
speaker, choose
NO (the center channel is
sent to the front speakers).
• Surround ( S ) – Select LARGE if your
surround speakers reproduce bass
frequencies effectively. Select
SMALL to
send bass frequencies to the other
speakers or subwoofer. If you didn’t
connect surround speakers choose
NO
(the sound of the surround channels is
sent to the front speakers or a subwoofer).
• Surround Back ( SB ) – Select the number
and size of surround back speakers you
have. Select
LARGE if your surround back
speakers reproduce bass frequencies
effectively. Select
SMALL to send bass
frequencies to the other speakers or
subwoofer. If you didn’t connect surround
back speakers choose
NO . 2
Note
1 If you select SMALL for the front speakers the subwoofer will automatically be fixed to YES . Also, the center, surround, and
surround back speakers can’t be set to LARGE if the front speakers are set to SMALL . In this case, all bass frequencies are sent
to the subwoofer.
2 • If the surround speakers are set to
NO , the surround back speakers will automatically be set to NO .
• If you selected SB 2ND Z or SB BIAMP (in Surround back speaker setting on page 42) you can’t adjust the surround back
settings.
• If you select one surround back speaker only, make sure that speaker is hooked up to the left surround back terminal.
VSX_915.book.fm 47 ページ ２００５年２月１日 火曜日 午前１１時６分