Proel PLFT100PCN - Manuale (Pagina 7)

6
PLEASE NOTE THAT AS PART OF PROEL SPA’S ONGOING COMMITMENT TO
CONTINUOUS PRODUCT DEVELOPMENT, SPECIFICATION ARE SUBJECT TO CHANGE
WITHOUT NOTICE. WHILST EVERY CARE IS TAKEN IN THE PREPARATION OF THIS
MANUAL PROEL SPA RESERVES THE RIGHT TO CHANGE SPECIFICATIONS IN THE
COURSE OF THE PRODUCT IMPROVEMENT. THE PUBLISHERS CANNOT BE HELD
RESPONSIBLE FOR THE ACCURACY OF THE INFORMATION HEREIN, OR ANY
CONSEQUENCE ARISING FROM THEM.
ATTENTION ! ATTENTION ! ATTENTION ! ATTENTION ! THIS INSTRUCTION MANUAL CONTAINS IMPORTANT INFORMATION
ABOUT THE INSTALLATION AND USE OF THE PROJECTOR. PLEASE READ AND
FOLLOW THESE INSTRUCTION CAREFULLY.
ATTENTION ! ATTENTION ! ATTENTION ! ATTENTION ! ALWAYS ENSURE THAT THE POWER TO THE PROJECTOR IS
DISCONNECTED BEFORE OPENING THE PROJECTOR COMMENCING ANY
MAINTENANCE WORK.
SAFE USAGE OF THE PROJECTOR
-
Do not attempt to dismantle and modify the projector.
-
Do not allow contact with water or any other fluids, or metallic objects (IP20).
-
Do not install the projector in areas of high humidity.
-
The projector is not designed or intended to be mounted directly on the
inflammable surface
-
Keep at least 0.5 m distance between the projector and adjacent inflammable
surfaces.
-
The projector must only be used complete with its protective grill and/ or front
lens.
-
The protective grill, lenses or ultraviolet filter must be changed if they are visibly
damaged to the point at which their effectiveness is diminished, for example by
becoming cracked or deeply scratched.
-
The lamp must be changed if it becomes damaged or deformed by heat.
-
Keep at least 2.5 m between the lamp and the illuminated surfaces.
-
Avoid direct exposure to the light from the lamp. The light is armful to the eye.
-
The lamp reaches very high temperatures, allow at least 10 minutes for the lamp
to cool completely before attempting to handle it. Ensure the lamp is cool before
attempting to handle it.
-
To ensure the reliability of the projector it should be kept clean. The lens and
dichroic filters should also be regularly cleaned to maintain an optimum light
output.
- In locations such as discotheques the objective lens should be cleaned every week
as smoke fluid can condense on it and very quickly reduce the light output.