Blomberg WNF 8543 ACE20 - Manuale (Pagina 18)

18 - EN
in the machine.
Changing the selections after
programme has started
Switching the machine to pause mode
Press Start / Pause button to switch the
machine to pause mode. Pause symbol
indicating that the machine has switched to
pause mode lights up and the Start symbol
showing that the programme has started and is
still going on flashes.
Changing additional function, speed and
temperature settings
Depending on the step the programme has
reached, you can cancel or activate the
additional functions; see, "Additional function
selection".
You can also change the speed and
temperature settings; see, "Spin speed
selection" and "Temperature selection"
Adding or taking out laundry
Press Start / Pause button to switch the
machine to pause mode. The programme
follow-up symbol of the relevant step during
which the machine was switched into the
pause mode will flash. Wait until the Loading
Door can be opened. Open the Loading Door
and add or take out the laundry. Close the
Loading Door. Make changes in additional
function, temperature and speed settings if
necessary. Start the machine by pressing the
Start / Pause button.
Changing the programme
Press Start / Pause button to switch the
machine to pause mode in order to change
a running programme for whatsoever reason.
Select the new programme and
Press Start / Pause button again. Programme
symbols disappear. Water in the machine, if
any, is drained and the new programme starts
from the beginning.
C Once the programme is changed, new
detergent must be put in.
Canceling the programme
Press On / Off button to cancel the programme.
Machine turns off. When you turn the machine
on again, programme will have been cancelled.
By making your selections again, you can start
a new programme or unload the machine.
C If the Loading Door symbol is not lit after
canceling the program, it means that
the water level is high. Drain the water
by running either the Pump or Spin
programme.
End of programme
Once the programme is over, End symbol
appears in the programme indicator. “End”
appears on the display. Additional function,
spin speed and temperature data that was
selected at the beginning of the programme is
not displayed.
End
Auto switch off
If no button is pressed within 15 minutes after
the end of the programme, machine will turn off
automatically to save energy. Just press On /
Off button to switch on the machine.
Machine Settings
You can use the Settings menu to change
Language, Brightness, Contrast, Light,
Favourite and Child Lock settings or to Restore
settings.
To enter in the Settings menu:
Press On / Off button to switch on the machine.
Press and hold the Soiling Level and Additional
Function buttons for 3 seconds. "Settings...X"
appears on the display. "X" shows the
number of seconds the button has to be kept
pressed. Settings menu will open at the end
of the countdown. Using the Left and Right
direction buttons (< - >), go to the main menu
you desire (Language, Brightness, Contrast,
Light, Favourite, Child lock, Restore Settings
and Return to main page) and press Confirm.
Submenus of the selected main menu will be
displayed. Using the Left and Right direction
arrows (< - >), navigate to the desired submenu
and press Confirm. Options in the relevant
submenu will be displayed. Make the desired
changes in the options and press "Confirm"
button again to save the new setting. Display
will switch to the next option in the upper menu.
To exit Settings menu, select "Return to main
page" and press Confirm button.
C You can also use the Programme button to
exit the submenu.
C Temperature, Spin Speed, Start / Pause,
Soiling Level and Additional Function
buttons are not functional in the settings
menu. Pressing these buttons will not
produce any results.
Language
Select the appropriate language for you in this
menu.
Brightness
Set the screen brightness to a value between 1
to 5 as you wish.
Contrast
Set the contrast to a value between 1 to 5 as
you wish.
Light
There are two options in the Light menu:
"Eco" and "Normal". When "Eco" mode is
selected, machine automatically drops the
screen brightness after a while to save energy.
If "Normal" mode is selected, there will be no