Instruction for use, S w i tc hi n g off, O p er ati o n – Blomberg FRM 1920 A+ Manuale d'uso

Pagina 9: F r eezer o per at i o n, Advice for food conservation

Advertising
background image
















































































S w i tc hi n g off

The switching off must be possible by taking
the plug out of the socket or by means of a
mains two-poles switch placed before the
socket.

O p er ati o n

Before putting into operation, clean the inside
of the appliance (see chapter „Cleaning").
After finishing this operation please plug
in the appliance, adjust the thermostat
knob to an average position. The green and
red LEDs in the signalling block must light.
Leave the appliance work for about 2
hours without putting food inside it.
The freezing of the fresh food is possible
after min. 20 hours of operation.

A p p l ia nce desc ri pt i o n


(Item. 1)

1. Door handle
2. Door
3. Lamp housing
4. Basket
5. Try
6. Lock housing
7. Thermostat box
8. Spacer for transport

F r eezer o per at i o n

Tempera ture adjustment

The temperature of the freezer is adjusted by
means of the knob assembled on the
thermostat (item. 4), position „MAX” being the
lowest temperature.
The achieved temperatures can vary
according to the conditions of use of the
appliance, such as: place of the appliance,
ambient temperature, frequency of door
opening, extent of filling with food of the
freezer. The position of the thermostat knob
will change according to these factors.
Normally, for an ambient temperature of
approx. 43

0

C, the thermostat will be adjusted

on an average position.



The signalling system is placed on the front
side of the freezer (Item 5).
It includes:
1. Thermostat adjustment knob – the inside

temperature is adjusted.

2. green LED – shows that the appliance is

supplied with electric energy.

3. red LED – damage – lights if the

temperature in the freezer is too high. The
LED will operate 15-45 minutes after the
putting into operation of the freezer, then it
must go off. If the LED goes on during the
operation, this means that defects have
occurred.

4. Orange button– fast freeze – by pushing it

the orange led goes on, showing that the
appliance entered into the "fast freeze"
mode . The exit of this mode is done by
pushing the button again, and the orange
led goes off.

The three LEDs give information about the
mode of operation of the freezer.

Advice for food conservation

The freezer is intended to keep the frozen food
for a long time, as well as to freeze fresh food.
One of the main elements for a successful
food freezing is the packing.
The main conditions that the packing must
fulfill are the following: to be airtight, to be inert
towards the packed food, to resist to low
temperatures, to be proof to liquids, grease,
water vapours, smells, to be able to be
washed.
These conditions are fulfilled by the following
types of packings: plastic or aluminium film,
plastic and aliminium vessels, waxed
cardboard glasses or plastic glasses.

I M P O R T A N T !
- For freezing the fresh food please use the
supplied baskets of the appliance.
- Do not place into the freezer a too large
quantity of food at a time. The quality of the
food is best kept if they are deeply frozen as
quickly as possible. This is why it is advisable
not to exceed the freezing capacity of the
appliance specified in the "Appliance data
sheet" (page 7). In order to reduce the freezing
time, push the button for „fast freeze”.

4

GB

Instruction for use

Advertising