Lenovo IdeaCentre Q110 - Manuale (Pagina 33)

Chapter 7. Replacing hardware
31
6. Align and then insert the new memory module into socket and push
down on the top edge of the memory module. Make sure the latches
lock the memory module in place.
7. Past back the three short pads on the new memory.
8. Install the computer cover. Refer to “Completing the installation”.
Replacing the CPU heat sink
Attention:
The heat sink becomes very hot when the system is on. Never touch
the heat sink with any metal or with your hands.
To replace the CPU heat sink:
1. Remove the computer cover. Refer to “Removing the computer cover”.
2. Loosen the four screws that secure the CPU heat sink to the
motherboard.
3. Disconnect the power cables from the system board.