Atlantis Land A01-IU1 - Manuale (Pagina 35)

ENGLISH
35
You should not connect the MISTRAL USB
to a bus-powered USB hub device, such as
keyboard, because there could be not
enough power for the ISDN TA.
• All the LEDs will be lit and, then, extinguished one
by one.
• Windows will tell you that the new device has been
detected. You will then see the following screen.
Click Next >.
• Select Search for a suitable driver for my device
(In Windows XP select Install from a list or
specific location). Click Next>. In next window,
check Specify a location and click Next>.
• Click Browse… to specify the driver directory such
as CDRom:\Mistral USB\Driver for installing Mistral
USB Adapter . Click OK and then Next> to continue.
• When windows titled Digital Signature Not Found
appear, press Yes to continue the installation.
• When the installation is completed, click Finish
button.
1.8 Windows 98SE/ME
Please refer to the following instructions and figures for
installation procedures:
• Connect your ISDN line to the RJ-45 jack labeled
LINE on the back of the Mistral USB.
• Connect the USB cable to the jack labeled USB on
the back of the Mistral. Connect the other end to the
PC or to a self-powered USB hub device, e.g.,
monitor.