Yamaha YSP-800 - Manuale (Pagina 70)

68
MANUAL SETUP
TREBLE GAIN (Treble gain)
Use to adjust the high frequency output level of each
speaker.
y
If the reflection point of the front left and right or surround left
and right sound beams is a curtain or other acoustically absorbent
surface, you can achieve more effective surround sound by
increasing the treble level for those sound beams.
Choices: –12.0 dB to +12.0 dB
Initial setting: 0 dB
• FL adjusts the high frequency output level of the front
left speaker.
• FR adjusts the high frequency output level of the front
right speaker.
• C adjusts the high frequency output level of the center
speaker.
• SL adjusts the high frequency output level of the
surround left speaker.
• SR adjusts the high frequency output level of the
surround right speaker.
■ IMAGE LOCATION (Image location)
Use to adjust the direction from which the front left and
right speaker sound is heard by directing these audio
signals so that they are also output from the center
speaker.
Use this feature to redirect audio signals if the sound
coming from the left and right speakers seems unnatural,
such as when your listening position is not the center of
your listening room.
You can only adjust this parameter when 3 beam mode or
5 beam mode is selected as the beam mode (see page 42).
Choices: ON, OFF
Setting range: 0% to 95%
Initial setting: 0%
LEFT (Left)
Adjusts audio signals towards the left.
The higher the percentage, the louder the output from the
center.
RIGHT (Right)
Adjusts audio signals towards the right.
The higher the percentage, the louder the output from the
center.
Surround L ;;;;;0dB
Surround R ;;;;;0dB
Center ;;;;;;;;;0dB
Front L ;;;;;;;;0dB
Front R ;;;;;;;;0dB
d)TREBLE GAIN
[ ]/[ ]:Up/Down[ ]/[ ]:Sel
[ENTER]:Return
p
p
.
p p
+ -
+ -
+ -
+ -
+ -
. OFF ) ON
LEFT ;;;;;;;;;;0%
RIGHT ;;;;;;;;;0%
C)IMAGE LOCATION
[ ]/[ ]:Up/Down[ ]/[ ]:Sel
[ENTER]:Return
p
p
p p
R L C p
Without adjustment
With the front left
speaker adjusted
Without adjustment
With the front right
speaker adjusted