Yamaha YSP-800 - Manuale (Pagina 14)

12
INSTALLATION
■ Detaching the metal apparatus from the
rear panel
A metal apparatus is attached to the rear panel used for
packing purposes. If the metal apparatus is a nuisance
when you install this unit, you can detach it from the rear
panel.
After you detach the metal apparatus from the rear panel, drive
the screws back in using a screwdriver.
■ Using a metal wall bracket
You can use the optional metal wall bracket to mount this
unit on the wall in your listening room.
y
Refer to the instructions supplied with the metal bracket for
details on how to attach the metal bracket to the wall or how to
attach this unit to the metal bracket.
■ Using a stand
You can mount your TV on the stand placed on a
commercially available rack to install this unit under your
TV.
y
Refer to the instructions supplied with the stand for details on
how to install the stand or how to mount this unit and the TV on
the stand.
■ Using a rack
You can install this unit either above or under your TV in a
commercially available rack.
Make sure that the rack is large enough to allow adequate
ventilation space around this unit (see page 11) and that it is
strong enough to support the weight of both this unit and your TV.
Note
This unit
TV
Metal wall bracket
Note
TV
This unit
Stand
When this unit is installed above your TV
When this unit is installed under your TV