Yamaha RX-V392RDS - Manuale (Pagina 16)

16
J
MEMORY (MAN’L/AUTO FM) button
When this button is pressed, the MEMORY indicator flashes for
about 5 seconds. During this period, select a desired preset
station number by pressing the corresponding preset station
number selector button to enter the displayed station into the
memory.
When this button is pressed and held for about 3 seconds, the
automatic preset tuning begins. (Refer to page 28 for details.)
K
EDIT button
This button is used to exchange the places of two preset
stations with each other.
L
TUNING DOWN/UP button
Used for tuning. Press the “UP” side to tune in to higher
frequencies, and press the “DOWN” side to tune in to lower
frequencies.
When this unit is in the PTY SEEK mode, pressing this switch
changes the currently selected program type.
M
TUNING MODE (AUTO/MAN’L MONO) button
Press this button to switch the tuning mode to automatic or
manual. To select the automatic tuning mode, press this
button so that “AUTO” lights up on the display. To select the
manual tuning mode, press this button so that “AUTO” goes
off.
N
DELAY/CENTER/REAR and TIME/LEVEL +/– buttons
RX-V492RDS only
Adjust the delay time (DELAY), the center channel output level
(CENTER) and the rear channel output level (REAR).
Select the item which you want to adjust by pressing the
DELAY/CENTER/REAR button and adjust its time or level by
pressing the TIME/LEVEL +/– button.
O
CENTER MODE button
Selects a center channel output mode (NORMAL, WIDE or
PHANTOM). (For details, refer to page 21.)
P
PROGRAM selector button
RX-V392RDS only
When the built-in digital sound field processor (including the
Dolby Pro Logic Surround decoder) is on, this button changes
the currently selected DSP program whenever the right or left
side of this button is pressed.
Q
CENTER LEVEL control
RX-V392RDS only
Adjusts the sound output level of the center speaker.
R
REAR LEVEL control
RX-V392RDS only
Adjusts the sound output level of the rear speakers.