Yamaha RX-V392RDS - Manuale (Pagina 10)

10
CONNECTING SPEAKERS
CENTER
OUTPUT
SUB
WOOFER
REAR
CENTER
C D
DUAL
SINGLE
CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
MAIN
SPEAKERS
A
B
REAR 6 Ω MIN./SPEAKER
SINGLE:6 Ω MIN./SPEAKER
DUAL:3 Ω MIN./SPEAKER
A OR B:4 Ω MIN./SPEAKER
A B:8 Ω MIN./SPEAKER
CENTER
MAIN
REAR 8 Ω MIN./SPEAKER
SINGLE:8 Ω MIN./SPEAKER
DUAL:4 Ω MIN./SPEAKER
A OR B:8 Ω MIN./SPEAKER
A B:I6 Ω MIN./SPEAKER
CENTER
MAIN
IMPEDANCE SELECTOR
Rear speaker Rear speaker
Center speaker
Main speakers B
Left Right
Left Right
Main speakers A
Subwoofer system
Left
Right
Note
Use speakers with the specified impedance shown on the rear
of this unit.
Note on main speaker connections:
One or two speaker systems can be connected to this unit. If
you use only one speaker system, connect it to either the
SPEAKERS A or B terminals.
Note on a subwoofer connection:
You may wish to add a subwoofer to reinforce low frequencies.
Connect the SUBWOOFER OUTPUT terminal of this unit to
the INPUT terminal of the subwoofer amplifier, and connect the
speaker terminals of the subwoofer amplifier to the subwoofer.
With some subwoofers, including the Yamaha Active Servo
Processing Subwoofer System, the amplifier and subwoofer
are in the same unit.
Note on center speaker connection:
One or two center speakers can be connected to this unit. If
you cannot place the center speaker on or under the TV, it is
recommended to use two center speakers and place them on
both sides of the TV to orient the center sound at the center
position. For connecting two center speakers, follow the
method shown below.
REAR
CENTER
C D
DUAL
SINGLE
Center speaker Center speaker
(Europe model)