Pioneer VSX-D912 - Manuale (Pagina 30)

Controls and displays 05
30
En
Display
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal
assigned for the current component:
AUTO
Lights when AUTO signal select is on.
SB
Depending on the source, this lights
when a signal with surround back
channel encoding is detected.
DIGITAL
Lights when a digital audio signal is
detected.
2 DIGITAL
Lights when a Dolby Digital encoded
signal is detected.
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a source with DTS encoded
audio signals is detected.
2 DTS
When the STANDARD mode of the receiver is
on, this lights to indicate decoding of a DTS
signal.
3 2 DIGITAL
When the STANDARD mode of the receiver is
on, this lights to indicate decoding of a Dolby
Digital signal.
4 2 PRO LOGIC II
When the ( STANDARD ) Pro Logic II mode of
the receiver is on, this lights to indicate Pro
Logic II decoding.
5 VIR.SB
Lights during Virtual surround back
processing.
6 ATT
Lights when INPUT ATT is used to attenuate
(reduce) the level of the analog input signal.
7 DIRECT
Lights when source direct playback is in use.
Direct playback bypasses the tone controls
and channel levels for the most accurate
reproduction of a source.
8 MIDNIGHT
Lights during Midnight listening.
9 SLEEP
Lights when the receiver is in sleep mode.
10 RF ATT
Lights when the RF attenuator is on (page 52).
RFATT EON
SP A B
RDS
1 2 3 4 5 7 6 14 8 9 10 12 13 11
15 20 18 17 16 19
VSX_712_812_912.book 30 ページ ２００３年２月６日 木曜日 午前１０時５１分