13 other settings, The input assign menu, Other settings – Pioneer VSX-916-S Manuale d'uso
Pagina 63: Other settings 13, Chapter 13
Other Settings
13
63
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 13:
Other Settings
The Input Assign menu
You only need to make settings in the Input
Assign menu if you didn’t hook up your digital
equipment according to the default settings for
the digital inputs, or if you have connected
equipment using component video cables.
1
Press
RECEIVER
on the remote control,
then press the
SETUP
button.
An on-screen display (OSD) appears on your
TV. Use
/ / /
and
ENTER
on the remote
control to navigate through the screens and
select menu items. Press
RETURN
to confirm
and exit the current menu.
2
Select ‘Input Assign’ from the System
Setup menu.
Assigning the digital inputs
• Default settings:
Coaxial - 1
–
DVD
Coaxial - 2
–
DVR
Optical - 1
–
CD
Optical - 2
–
TV
You only need to do this if you didn’t hook up
your digital equipment according to the default
settings for the digital inputs (see above). This
setting tells the receiver what digital
equipment is hooked up to which terminal so
the buttons on the remote correspond to what
you have hooked up.
1
Select ‘Digital Input’ from the Input
Assign menu.
2
Select the number of the digital input to
which you’ve connected the digital component.
The numbers correspond with the numbers
beside the inputs on the back of the receiver.
3
Select the component that corresponds
with the one you connected to that input.
Select between
DVD
,
TV
,
CD
,
CD-R
,
DVR
or
OFF
.
• Use
/
and
ENTER
to do this.
• If you assign a digital input to a certain
function (for example,
DVD/LD
) then any
digital inputs previously assigned to that
function will automatically be switched off.
4
When you're finished, press RETURN.
You return to the Input Assign menu.
Assigning the component video inputs
• Default settings:
Component 1
–
DVD
Component 2
–
TV
Component 3
–
DVR
If you used component video cords to connect
your video equipment you must tell the receiver
which device it is, or else you may see the S-
video or composite video input instead of the
component video signal. For more on this, see
Using the component video jacks
on page 17.
1
Select ‘Component Input’ from the Input
Assign menu.
System Setup
1.Surr Back System
2.Auto MCACC
3.Manual MCACC
4.Manual SP Setup
5.Input Assign
6.Other Setup
: Exit
5.Input Assign
:Return
a.Digital Input
b.Component Input
5.Input Assign
:Return
a.Digital Input
b.Component Input
5a.Digital Input Setup
:Finish
Coaxial - 1
DVD
Coaxial - 2
[
DVR ]
Optical - 1
[
CD
]
Optical - 2
[
TV
]
5. Input Assign
:Return
a.Digital Input
b.Component Input
5b.Component Input
:Finish
Component - 1
DVD
Component - 2 [ TV ]
Component - 3 [ DVR ]
VSX_916.book.fm 63 ページ ２００５年１２月２２日 木曜日 午後４時２１分