Operations, 7 automatic operation, Listening to radio – Marantz ST6001 Manuale d'uso
Pagina 11: Fine, manual tuning, 7 in fine (tuning) mode, 7 in manual (tuning) mode
7
ENGLISH
MEMORY PRESETTING
7 Manual operation
For example: presetting FM 90.1 MHz, to Preset number. 10
1.
Select the FM by using the
BAND
button
!7
.
2.
Tune to 90.1 MHz by using the
TUNING
5∞
button
i
.
3.
Press the
MEMO
button
!1
briefly (for less than 0.5
second) Then, “MEMO” will blink in the display.
4.
Select the preset number by using the
PRESET
5∞
button
!4
.
5.
MEMO
button
!1
pushed again, 90.1 MHz (broadcast
station) was able to be memorized in number 10 by this.
Note
Be sure to select the antenna A or B memorization when
you preset manual memory in FM broadcast.
7 Automatic operation
1.
Select the desired broadcasting (FM, AM, or LW) by
using the
BAND
button
!7
.
2.
Press the
MEMO
button
!1
slightly longer than 1.5
second does.
Then, broadcasting will be automatically received, and
as many broadcasting station are received well will be
memorized preset number-01 after another.
3.
Check the broadcasting station by using the
PRESET
5∞
button
!4
.
Note
• In the case of FM automatic presetting, the antenna A, B
selector is set to “A” automatically,
And the broadcasting station is scanned twice. The
stations that have stronger broadcasting signal are preset
in the first time.; weaker ones are preset in the second
time.
• If a new broadcasting station is preset into a channel the
broadcasting station which has been preset into that
position area will be automatically erased.
• In mountainous or remote area broadcasting stations
which have weak broadcasting signals cannot be
automatically preset into the memory.
• Max. 30 broadcasting stations each for FM, AM(MW and
LW) bands can be preset.
LISTENING TO RADIO
1.
Select FM, AM, or LW by using the
BAND
button
!7
.
2.
Tune to the desired broadcast by using the
TUNING i
or
PRESET
5∞
button
!4
.
3.
FM broadcasting is set up to “STEREO” mode
If the broadcasting signal is weak, or if there is a large
amount of interference in FM stereo broadcast, change
the monaural mode by presetting the
FM MODE
button
!5
.
4.
Select the IF BAND (FM bandwidth)
Select the NARROW bandwidth by pressing this button if
the broadcast signal is interfered with adjacent
broadcast in the FM .
FINE, MANUAL TUNING
This function used for selection the manual tuning of the fine
tuning mode.
Fine tuning mode is available only in the FM mode.
1.
Press the
TUNING MODE
button
u
.
2.
Every time you press this button, the following will be
displayed FINE
⇔
MANUAL.
7 In FINE (Tuning) mode
When you try press the
TUNING
5∞
button
i
, the
frequency will be selected by 10 kHz step to ±50 kHz.
Then, it will automatically be set to the MANUAL mode in 4
second.
7 In MANUAL (Tuning) mode
1.
Press the
TUNING
5∞
button
i
in the FM band, then
the frequency will be selected by 50 kHz step.
2.
In the MW band, the frequency will be selected by 9 kHz
step.
3.
In the LW band, the frequency will be selected by 1 kHz
step.
OPERATIONS
F M / A M T U N E R S T 6 0 0 1
ANTETTA
IF BAND
FM
ON/STAMDBY
POWER
STANDBY
WIDE
NARROW
A
B
RDS
TIMER SET
BAND
ON/OFF
FM MODE
PRESET
UP
DOWN
UP
DOWN
TUNING
MEMO
NEXT
CANCEL
TUNING
MODE
/DISPLAY
ST.NAME
TIME ADJ.
TIMER DAILY ONCE
TUNED
STEREO
RDS
PTY
PT
TP TA
PRESET
kHz
MHz
CH
MEMO
u
i
!1
!4
!5
!7