Campomatic FC500IT - Manuale (Pagina 18)

SWITCHING ON THE APPLIANCE
The appliance is switched on by touching the symbol for at
least 0.5 seconds.
It is possible to switch off only the refrigerator compartment by
touching the symbol for 4 seconds (the "--" symbol appears
on the display);
the freezer compartment may be switched off by touching the
symbol for at least 4 seconds.
NOTE: in this case, the refrigerator compartment and all the
display symbols are also automatically switched off.
SETTING THE TEMPERATURE OF THE REFRIGERATOR AREA
The refrigerator display indicates the actual internal temperature
of the refrigerator compartment ranging from 0
°
C to 19
°
C; if the
temperature exceeds 19
°
C, the symbol "H" appears on the
display. Refrigerator temperature can be adjusted by touching
the symbol; temperatures between 2
°
C and 7
°
C can be set.
When the refrigerator is switched on, if you touch the symbol
the set temperature value will flash on the display for 6 seconds.
To set a new temperature, touch the symbol and, while the
display is flashing, touch the same symbol repeatedly until the
desired temperature value has been reached; the new setting
will be stored after the display has stopped flashing (6 seconds).
SETTING THE TEMPERATRE OF THE FREEZER AREA
The freezer display indicates the actual internal temperature of
the freezer compartment ranging from +20
°
C to -40
°
C; if the
temperature exceeds +20
°
C, the symbol "H" appears on freezer
display. Freezer temperature can be adjusted by touching the
symbol; temperatures between -16
°
C and -24
°
C can be set.
When the refrigerator is switched on, if you touch the symbol
the set temperature value will flash on the display for 6 seconds.
To set a new temperature, touch the symbol and, while the
display is flashing, touch the same symbol repeatedly until the
desired temperature value has been reached; the new setting
will be stored after the display has stopped flashing (6 seconds).
TIP!
With room temperatures between 20
°
C and 25
°
C, we
suggest setting the refrigerator temperature at +5
°
C
and the freezer temperature at -18
°
C.
The freezer and refrigerator temperature is also depending
on how often the doors are opened and the quantity of food
contained inside the
product.
16
FRIDGE DISPLAY
FREEZER DISPLAY
FRIDGE COMPARTMENT POWER SWITCH (ON/OFF)
FRIDGE TEMPERATURE ADJUSTMENT
FRIDGE DOOR OPEN ALARM (DEACTIVATION)
FREEZER TEMPERATURE ADJUSTMENT
FREEZER DOOR OPEN ALARM (DEACTIVATION)
ON / OFF
HOLIDAY FUNCTION
SUPER FUNCTION
PRE-ALARM - ALARM
FREEZER TEMPERATURE
GB STARTING THE APPLIANCE
NOTE
Before plugging the appliance in, make sure that the power
supply voltage corresponds to the value shown on the product
data plate (“See the section Electrical connection”). Plug the
appliance into the electricity mains supply. The display will flash,
showing the default temperature set by the manufacturer (7
°
C
for the refrigerator area, -16
°
C for the freezer area).
CAUTION
Whenever the product has been lying horizontally during
transportation, it should be left to stand upright for at least six
hours before it is switched on, otherwise it may be noisy when
it is in operation.