Campomatic DW646BI - Manuale (Pagina 31)

If the error has been removed, P0 will appear and you will be able to programme the
machine again.
If the same error is indicated again or if you press the
button but P0 does not
appear, it means that the cause of the error has not been removed, has been removed
incorrectly, or that technical service is required.
Attention: some error indications refer to actual safety problems with the product (e.g.
leaks or activation of thermal overload protections). In this case the appliance cannot be
re-started. This will require the assistance of a specialized technician to check the
appliance
Call the authorized technical service centre,
you have done the following:
take note of the message displayed by the diagnostics system;
plug the plug out of the socket;
close the water tap
E0
Check that:
the water tap is open;
the filter in the water fill pipe is not clogged;
the water fill pipe does not have any chokes
E1
Check that:
the water tap is open;
the filter in the water fill pipe is not clogged;
the water fill pipe does not have any chokes
E2 The dishwasher does not drain.
Check that:
the drain hose is not crushed or clogged;
the water drain pipe is not clogged;
the filter of the dishwasher is not clogged.
EA
Check that:
the drain hose is not crushed or clogged;
the water drain pipe is not clogged;
the filter of the dishwasher is not clogged
pressure in plumbing system too low
Ec
Check that:
no bowls have overturned
Ed
Check that:
the door is closed
open and close the door
29