Campomatic C64BC - Manuale (Pagina 34)

In constructing the blast chiller different materials which can
be recycled have been used:
Stainless steel: cell-grill lining
Galvanised sheet iron: external protective parts structure
Copper: refrigerating circuit
Refrigerant gas R 404A: refrigerating circuit
Compressor oil: refrigerating circuit
Polyurethane PUR: thermal insulation
PST for foods: doorframe inner walls
Glass: aesthetic parts
Borosilicate: drip tray
The scrapping and disposal of blast chiller parts must be
carried out in compliance with the regulations in force in the
countries where the appliance is installed; in particular it is
wise to entrust the recuperation of certain materials, such as
refrigerant gases, compressor oil and thermal insulators to
specialised companies.
10. DECLARATION OF COMPLIANCE
The materials and objects which are destined for contact with
food products comply with the prescriptions of REGULATION
1935/2004/CE.
This appliance complies with standards:
EN 60335-1: 03
EN 60335-2-24: 2000 (ed. 5)
EN 55014-1;00 + A1: 01 + A2: 02 + EN 55014-2;97 + EC:
97 + A1: 01 + EN 61000-3-2;00 + A2 : 05 + EN 61000-3-
3;95 + A1: 2001 + A2: 05 + A2/IS1: 05 +
EN 61000-4-2;95 + A1: 98 + A2: 01 + EN 61000-4-4: 04 +
EN 61000-4-5: 95 + A01:01 + EN 61000-4-6: 96 + A1: 01
+ IS1: 04 + EN 61000-4-11: 04
In accordance with what is prescribed by the Low Voltage
directive 2006/95/CE and the Electromagnetic compatibility
Directive 2004/108/CE.
MAXIMUM ROOM TEMPERATURE
For the thermodynamic group, the working room temperature
MUST NOT be higher than 32°C; after 32°C the declared
yields are NOT guaranteed.
30