Bompani BOR11CA/E - Manuale (Pagina 17)

Discs - tips and warnings
Do not exert too much pressure on the pusher when you press ingredients down the feeding tube.
Do not let the appliance run too long when you shred (hard) cheese. Otherwise the cheese
becomes too hot, starts to melt and turns lumpy.
Do not use the shredding disc to shred chocolate. Only use the food processor blade unit for this
purpose.
Do not fill the bowl beyond the MAX indication.
1. Pre-cut large ingredients to make them fit into the feeding tube.
2. Fill the feeding tube evenly for the best results.
- When you shred or granulate soft ingredients, use a low speed to prevent the ingredients from
turning into a puree.
- If the ingredients you are going to shred or slice have a small diameter, put the outer pusher in
the feeding tube to make the feeding tube smaller. Then use the inner pusher to push the
ingredients down the feeding tube.
- When you have to process a large amount of ingredients, process small batches and empty the
bowl between batches.
Adjustable slicing disc - tips and warnings
The adjustable slicing disc allows you to cut ingredients to any thickness you like. The slicing insert
has a very sharp cutting edge. Do not touch the cutting edge. Do not fill the bowl beyond the MAX
indication.
1. Insert the slicing insert into the top of the carrier.
2. Attach the adjusting knob to the bottom of the disc and turn it to the position marked with a dot
to lock it.
3. Turn the adjusting knob to set the slicing disc to the slicing thickness you prefer.