VDO M2WL - Manual (Page 20)

20
M2 WL
“Language” appears on the display.
Press the
BIKE button to scroll to the setting for the
total ride time.
Settings – setting the total ride time
Press the SET button to open the setting
for the total ride time.
The left digit of the hours setting flashes and
is ready to be set.
Press the BIKE button to set the value for this digit.
Press the SET button to confirm your setting.
The next digit on the left starts to flash and is ready to be set.
Press the BIKE button to set the value for this digit.
Press the SET button to confirm your setting.
Once you have set all four digits, confirm the setting again
by pressing the
SET button.
The minutes setting is then opened.
You can set the total ride time on the VDO M2 WL.
E.g. you can set your total ride time (total ride time for all
trips) at the start of the new cycling season).
ATTENTION: the VDO M2 WL has a data memory.
No data is lost.
The process is as follows:
Press and hold the SET button until the settings menu
opens.