Studiologic Numa Organ 2 - Manuale (Pagina 19)

NUMA ORGAN 2 by Studiologic® 19
You can save your complete Preset bank by uploading it on your
computer. To enter the function activate the Edit mode by pres-
sing at the same time both Transpose+ and Transpose- for a few
seconds; both buttons will start to blink. Pressing the Preset button
the complete bank will be sent to your computer as a file (MIDI file)
that you can name as you prefer to have a reference.
During the save the Preset button LED will blink until the data
transfer will be completed.
To recall (Dowload) a Preset bank, activate the Edit function and
simply “play“ the file you want to install with the computer‘s MIDI
player; the Preset button LED will blink until the data transfer will
be completed.
Note: both Upload & Download functions are available by connecting the
instrument to your computer via USB.
You can connect your Numa Organ 2 to an external Rotary Speaker
cabinet via a standard 11-Pin connector.
The rotor speed, as well as the Start/Stop (Brake), is also controlla-
ble with the Rotary wheel and the Sustain pedal. This function is
identical to the internal Rotary Speaker simulation (page XX).
Connect the 11-pin socket on the back of the Numa Organ 2 to
the Rotary Speaker cabinet, by using a suitable cable. You can then
use all outputs simultaneously, namely an external Rotary, the
analogue audio outputs with the internal Rotary simulation, and
the “clean” direct outs, as well as both headphone outputs of the
Numa Organ 2.
For further Rotary Speaker connection/control information, please
also refer to the operation manual of the external speaker system.
Pin Function
1 Audio (Rotary)
2 Audio (Stationary)
3 Audio (Aux 1)
4 Ground
5 Control Supply
6 Control Circuit
7 Fast
8 Slow
9 Speed Adjust
10 Audio (Aux 2)
11 +29 VDC
To update your instrument, connect it to your computer using the
propper USB port (mini or standard) according to the instructions
you will find on the Studiologic website, with the Organ Loader
software and related files, when published.
Press and hold Upper while switching on the Numa Organ 2. If the
connection to the computer is correct and the appropriate soft-
ware installed, the Upper button will blink slowly. If the connection
cannot be established, it will blink fast.
Now you can transfer data to the Numa Organ 2 using the compu-
ter software.
11
10
9
8
7
6
5
4 3
2
1
External Rotary Speaker
Cabinet
Preset Up/Download / External Rotary S. / Update
System Update
Preset Upload & Download
EN